rexresearch.com

---

---

---

http://allafrica.com/stories/201006070641.html
7 June 2010


The new invention will offer uninterrupted power supply at no cost, says the inventor.

This was the view expressed by most of those who attended an investor's dinner in Abuja where the invention was presented and demonstrated.

The invention called Self-Sustaining Emagnetodynamics Machine, according to the inventor, Izuogu, was made possible after over 30 years of research and work.

Already, the machine has received patents from 104 countries and is recognized by the World Intellectual Property Organization (WIPO).

Presenting it to the investors at the dinner which included former Vice-President Alex Ekwueme, Senator Osita Izunaso, Gen. Chris Garuba (Rtd), Alhaji Alani Bankole, Prof Peter Onwualu who is Director-General of Raw Material Research and Development Council (RMRDC), Izuogu said the machine is capable of generating as much megawatt of electricity as could power Nigeria.

"We are here today to announce to you that this machine can give uninterruptible electricity power supply to our nation and because it uses no input energy to operate, government can indeed make Nigerians pay nothing for electricity."

He said that the new invention, when fully installed, would also eliminate running cost as it is self-sustaining and needs no diesel or petrol to power it.

The machine, he said, became possible after turning the two laws of emagnetodynamics into interpretable work.

"We are here today because some 33 years ago, while I worked as a missionary itinerant evangelist of the gospel in Benin City, the Almighty God gave me a vision of a machine that could help solve the energy problems of the world. Right there in 1980, I received the two laws of emagnetodynamics.

"By June 5, 1982 I had succeeded in turning these two laws into a working machine. It was very exciting but because of the frightening and intimidating effects of the well known science laws, I was scared to publish my findings. I wished to work more and prove these things very well. So, I worked for another 27 years before I approached the World Intellectual Property Organisation for a patent.

"Under the direction of the WIPO, patents for this invention have now been filed in 104 nations of the world," he said.

Describing the machine, WIPO said "the self-sustaining emagnetodynamics machine utilizes a theory that is different from the age old theory on which electric motors have been built for over five hundred [sic] years since the days of the great inventor and scientist, Michael Faraday."

WIPO said: "The present invention is a magnet motor that utilizes the inventor's first and second laws of emagnetodynamics as well as the inventor's horse orientation theory of magnetism."

It said, "the critical feature of this machine is that it is distinguishable from earlier invention of the non self sustaining emagnetodynamics machine in that the self-sustaining machine generates a feedback current which provides release from the backlash stators and therefore the machine is able to run without any external source of energy."

---

Inventor DR EZEKIEL 0 IZUOGU
Citizenship NIGERIA
Residence HOUSE 8 ROAD 6922, GWARIMPA, ABUJA

BACKGROUND OF THE INVENTION

The present invention is in the technical field of PHYSICS

More particularly, the present invention is in the technical field of ENERGY.

The prior art in such technical field includes:

THE ELECTRIC OR BATTERY OPERATED EMAGNETODYNAMICS MOTOR, THEORY OF MAGNETISM AND THE THEORY OF FORCE EXERTED ON A CURRENT-CARRYING CONDUCTOR IN A MAGNETIC FIELD.

FORCE IS EXERTED ON A CURRENT CARRYING CONDUCTOR IN A MAGNETIC FIELD THIS THEORY HAS BEEN EXPLOITED IN BUILDING THE ELECTRIC MOTOR WHICH IS A MACHINE THAT CONVERTS ELECTRICAL ENERGY TO MECHANICAL ENERGY THE EMAGNETODYNAMICS MOTOR WORKS ON A DIFFERENT THEORY, NAMELY THE LAWS OF EMAGNETODYNAMICS.

BRIEF SUMMARY OF THE INVENTION

The present invention is a MAGNET MOTOR, CALLED THE SELF-SUSTAINING EMAGNETODYNAMICS MACHINE THAT UTILISES THE INVENTOR'S FIRST AND SECOND LAWS OF EMAGNETODYNAMICS AS WELL AS THE INVENTOR'S HORSE ORIENTATION THEORY OF MAGNETISM

The first law states as follows:

A SUSPENDED COMPOSITE MAGNETIC POLE WILL ROTATE IN A CERTAIN DIRECTION IF PLACED IN THE VICINITY OF AN ARRAY OF LIKE POLES OF MAGNETS.

The second law states that:

THE DIRECTION OF ROTATION IS THAT OF THE COMPOSITE POLE SIMILAR TO THE ARRAY*

*(The inventor acknowledges the similarity between these laws and that of Faraday's discovery of the force exerted on a current-carrying conductor in a magnetic field. His knowledge of Faraday's work certainly inspired and guided him to establish similar laws for the movement of magnets without current-carrying conductors.)

THE CRITICAL FEATURE OF THIS MACHINE IS THAT IT IS DISTINGUISHABLE FROM THE EARLIER INVENTION OF THE NON SELF-SUSTAINING EMAGNETODYNAMICS MACHINE IN THAT THE SELF-SUSTAINING MACHINE GENERATES A FEEDBACK CURRENT WHICH PROVIDES RELEASE FROM THE BACKLASH STATORS AND THEREFORE THE MACHINE IS ABLE TO RUN WITHOUT ANY EXTERNAL SOURCE OF ENERGY WHILE AN ELECTRIC MOTOR CONVERTS ELECTRICAL ENERGY TO MAGNETIC ENERGY AND THEN CONVERTS MAGNETIC ENERGY TO MECHANICAL ENERGY, THE SELF-SUSTAINING EMAGNETODYNAMICS MOTOR, LIKE ITS NON-SELF-SUSTAINING COUNTERPART, CONVERTS AN INTERACTION OF MAGNETIC POLES DIRECTLY TO MECHANICAL ENERGY, WITHOUT GOING THROUGH THE INTERMEDIARY OF CURRENT-CARRYING CONDUCTORS

BRIEF DESCRIPTION OF THE SEVERAL VIEWS OF THE DRAWING

FIG. 1 IS A PERSPECTIVE VIEW OF THE COMPOSITE MAGNETIC POLE IT IS A CRESCENT SHAPED NORTH AND SOUTH POLES OF TWO PERMANENT MAGNETS HELD TOGETHER ON A BRASS OR COPPER, OR ANY NON-MAGNETIC PLATE BENT INTO THE CRESCENT SHAPE. It is mounted on a non magnetic pivoted spindle.


FIG 2 shows an array of north poles of similar magnets (It could also have been South poles). However, similar poles must be used for the system to function.


FIG 3 shows the disposition of the magnetic poles of the magnets used to form the array of magnetic poles referred to in fig 2.


FIG 4 shows the composite magnetic pole placed in the vicinity of the array of like poles.


FIG 5 is a composite magnetic pole, but this time made of a slab of SOFT IRON core. It is mounted on a non magnetic, pivoted spindle.


FIG 6 shows the angular disposition of the rotor vanes in each plane.


FIG 7 shows a design model of the complete SELF-SUSTAINING Emagnetodynamics motor, with four planes mounted.


FIG 8 shows the electrical connections for the machine shown in fig 7.


FIG 9 shows the rotor vane with its stem.


FIG 10 shows the permanent magnet that forms part of the composite polarity of the rotor It is a 60x15x5mm powerful ECLIPSE MAGNET bought from NAAFCO SCIENTIFIC, London. It gives an angle deflection of 15 degrees on a magnetometer placed some 300mm away.


FIG 11 shows the release electromagnets, 40, 42


FIG 12 shows an unmagnetised bar of iron.


FIG 13 shows stators and vane on one plane.


FIG 14 shows the same bar now inside a solenoid.


FIG 15 shows the clutch yoke for the machine.


FIG 16 shows the clutch fork for the clutch assembly.


FIG 17 shows the rotor for the machine.


FIG 18 shows the clutch assembly.


FIG 19 shows five horses pulling in different directions.


FIG 20 shows the five horses pulling in the same direction.


FIG 21 The machine with electromagnet stators giving mathematical and experimental proof that it achieves an efficiency of OVER UNITY.


DETAILED DESCRIPTION OF THE INVENTION

FIG 7.

9, 11 -- Ball bearings at bottom and top, respectively,


10 -- Circular Brass plate which forms the base of the machine (Diameter 500mm, Thickness 10mm)

12 -- Ignition Key that switches on the machine (A typical motor car, e.g., Volkswagen car ignition key is adequate).

14 -- Group of feedback generators, serving also as KICKSTARTER.

15 -- A rectangular Perspex plate (180x180x5mm) that holds the carbon brushes

16 -- Slip ring commutators

18, 19 20 -- Permanent magnet stators of plane 1

22, 32 -- Release electromagnets for plane 1

24, 36 -- Release electromagnets for plane 4

30 -- Clutch pedal

26 -- Rotor shaft, brass, 30mm diameter

28 -- Rectangular plate of copper shackle

FIG 8 : THE ELECTRICAL CONNECTIONS

21 -- Motor battery, 12 volts d c

23 -- A resistance suitable to protect the feedback generator/kickstart motor

25 -- Kickstarter motor/feedback generator, 12 volt dc , rich in current

27 -- Distributor, copper,

29 -- slip ring copper commutators,

31 -- carbon brush

33, 35, 37, 39, 41, 43, 45, 47 -- carbon brushes to energise release electromagnets.

FIG 9 :

38, 40 -- Rectangular permanent magnets that form the composite pole O

42 -- The aluminium vane to hold the composite poles

50 -- The vane stem made of brass, length , diameter 10 mm

52 -- Vane stabilizer length 25 mm, diameter 5mm

FIG 11

JS 54 -- Aluminium former for release electromagnet, length 150 mm, internal diameter 37.2mm, external diameter 39mm, wound with 0.5mm diameter insulated copper wire having total resistance of 14 ohms.

56 -- Soft iron core for the electromagnet length 160mm, diameter 37mm

FIG 12 : An unmagnetised bar of soft iron

FIG 14 : Soft iron bar in a solenoid

FIG 13 : ONE PLANE SHOWING ANGULAR DISPOSITION OF STATORS

38 40 -- Rectangular permanent magnets that form the composite pole

66,74 -- Release electromagnets

68,70,72 -- Permanent magnet stators

76 -- Aluminium vane

FIG 15 : CLUTCH YOKE

82 -- Internal hole of diameter

84 -- Circular arm diameter and wide

86 -- Clutch shank outside diameter

88 -- Outer tube of outer diameter, mm long

FIG 16 : THE CLUTCH FORK

FIG 17 : THE BRASS ROTOR,870 mm, overall length

26 -- Smaller rotor stem, diameter 30mm

90 -- slip ring commutator,carry[iota]ng the distributor

92 -- The idle copper separator

FIG 18 : THE CLUTCH ASSEMBLY

29 84 94 -- As already described

26 -- Rotor shaft

96 -- Feedback generator,

98 -- Geared pully on generator,

100 -- Geared flywheel attached to rotor shaft

97 -- Clutch fiber attached to flywheel(made of leather material]

99 -- Clutch cable

FIG 19 : FIVE HORSES PULLING IN DIFFERENT DIRECTIONS

FIG 20 : FIVE HORSES PULLING IN THE SAME DIRECTION

(Illustration of the inventor s HORSE-ORIENTATION THEORY OF MAGNETISM)

Fig 21 : The machine, showing proof of OVER UNITY efficiency, mathematically.

Referring now to the invention in more detail, in FIG 1 to 21 there is shown the machine and its component parts. In particular in Fig 7 is shown the actual complete design of a four plane, self-sustaining, Emagnetodynamics machine with all components in place

Two rods of brass 35 37 (diameter 25mm, height 900mm ) threaded a length of 15 mm on each end ) are mounted vertically on a horizontal circular brass plate 10, the brass rods carrying aluminium sleeves 50 to stabilize the system. The rotor 26 is installed into the lower ball bearing 9.

The rotor 26 has a section on its lower portion ( Length 70 mm, diameter 60 mm ) which also holds the distributor 27 and slip ring 29.

The Perspex 15 holding the carbon brushes 31,33,35,37,39,41,43,45,47 is now installed and secured by means of four copper bolts.

The circular Perspex plates 49, 51, 53, 55, is each carrying three permanent magnets as 18,19,20 mounted on each plane, as well as the electromagnets 22,32. The five stators of a plane are placed round a circular hole of diameter 480 mm cut at the centre of Perspex. The stators cover an angle of 180 degrees. This means an angle of 45 degrees between one stator and its adjacent one. The circular distance, measured along the circumference of the circle between the centre of one stator and the adjacent stator, determines the circuler length of the distance between the north and south poles of the composite polarity of the rotor. The circular Perspex plates 49,51,53,55, are now held firmly by sliding down the aluminium sleeves to tighten The aluminium vanes 76 carrying the two permanent magnets, in each plane, that form the composite poles, are now tightened into place and the top end of the rotor is slid into the upper ball bearing 11 in the copper support 28. Nuts are now tightened at the threaded ends of the brass supports 35,37 to make the system strong and rigid. A dc battery 21 is now connected to the release electromagnets via the ignition key 12, the motor 25 and the nine brushes The dc motor 25 is connected in parallel with the release electromagnets and is protected from the heavy current surge by a heavy duty resistor 23.

Section 2

The system is ready to run As the ignition key 12 is turned, current from the battery 21 turns on the dc motor 25, which turns the rotor in a clockwise direction (which must coincide with the direction in which the second law of Emagnetodynamics says the rotor will move ). The motor 25 is able to turn the rotor 26 by means of wheel and pinion arrangement (The rotor 26 carries a cogged wheel 144 mm in diameter, while the motor carries a cogged wheel, 10mm in diameter, much like a kickstarter in an internal combustion engine ) The battery 21 simultaneously energises the Distributor 27, and motor 25. The distributor 27 makes electrical contact with the brushes 33, 35, 37,39,41,43,45, thereby energizing the Release electromagnets much like a distributor in a conventional internal combustion engine would fire the four PLUGS. The first release electromagnet 22 in plane 1, is timed to develop a North Pole strength which must equal, or nearly so, the pole strength of the stator permanent Magnets. This must happen at the INSTANT that the magnetic axis of the leading composite pole of the rotor has just crossd the magnetic axis of the Electromagnet 22. The rotor 26 moves on and at the point where the magnetic axis of the leading rotor composite pole is about to cross the magnetic axis of the last rotor permanent magnet 19, the distributor 27 makes contact with the second brush 35, thereby energizing the last stator electromagnet 32, and thereby freeing the trailing composite pole of the rotor, a South Pole which would have been otherwise attracted, and held back by the North pole of the last stator permanent magnet 19. This would have impaired the rotation of the rotor and stalled the machine. Being a four plane machine, torque exerted on the rotor by other stators in other planes, enables the rotor cover the idle distance and this brings it once more under the influence of the first stator electromagnet 22, whose iron core draws the leading north pole of the composite rotor pole under its influence and the process is repeated. The rotor is thus able to continue its rotation.

Notice that the four vanes all attached to the rotor but traversing different stators in different planes, are not disposed at an angle of 90 degrees each.

What we find, in fig 6B is that the first vane Vl is leading the second vane V2 by an angle of 90 degrees. V2 leads V3 by an angle of 135 degrees,while V3 leads V4 by an angle of 67.5 degrees. The simple angler disposition of rotor vanes in a four plane machine would have been to divide 360 degrees by four so each vane will lead the following vane by 90 degrees. We have not adopted this simplistic approach in the design because it would have meant the distributor will energize more than one electromagnet at the same time. Since the electromagnets draw enormous current from the feedback generator, the latter may not cope with this great drain on its scarce energy, and the system may stall. To avoid this fatal situation, the vanes are disposed as shown in fig 6. For a six plane machine the disposition of vanes will again be different and so on. The whole idea in the design is to avoid a situation where more than one release electromagnet is energized at the same instant.

Were we building a five or six or twenty plane machine, the angular disposition must be determined separately for each case just as a designer of an internal combustion engine designing a four, five or six CYLINDER engines, must for each engine decide the angular disposition of the projections on the CAM SHAFT which in turn determine the FIRING SEQUENCE OF PLUGS IN THE compression chamber.

From the foregoing, we can see that though we call this machine a magnet motor, IN REALITY, AND FROM A DESIGN STANDPOINT, IT HAS FAR MORE IN COMMON WITH THE INTERNAL COMBUSTION ENGINE THAN IT HAS WITH A CONVENTIONAL ELECTRIC MOTOR.

Section 3

Referring to the Fig 7, for the rotor 26 to rotate, it is necessary to ensure that the circular length of the vane approximately equals the circular distance between one stator magnetic axis and the next one.
This is a critical condition for the system to work. It is equally essential that the pole strength of all stator permanent magnets are equal or else the first and second laws of Emagnetodynamics would not have been complied with and the machine will not function.

The Emagnetodynamics machine is essentially a magnet motor. It is therefore necessary to ensure that only non magnetic metals are used to build all the parts of the machine or else critical magnetic field strength required at certain points will be weakened or impaired. All bolts, nuts, etc are made of copper or brass or aluminium to avoid magnetic INTERFERENCES AND DISTORTIONS which would critically undermine the set up.

Just like the plug of an internal combustion engine must be ignited at a particular TIMING, the release electromagnets must be "ignited"/energized at the proper TIMING in order to secure releases of the rotor 26 at the backlash points and keep the motor running. To ensure this PRECISION TIMING, the positions of the carbon brushes, are made adjustable, much like the TIMING CHAIN of an internal combustion engine. The brushes are mounted on bases that themselves move on circular grooves made on the rectangular Perspex 15. When the appropriate timing position has been determined, the brush base is screwed unto the Perspex base by means of a brass bolt and brass nut.

Section 4

Refer to fig 7 of the invention,the rotor 26 is made of copper and is 870 mm high with holes made along its stem at various heights to take vane stems; these coincide with the heights of the four planes.

While the rotor 26 has big stem with a diameter of 60 mm, and length 70mm,the rest of the body has a diameter of 30mm The slip rings 90,94 (width 10 mm and thickness 0.5 mm) are made of copper,which is both a good electrical conductor and non-rusting material. These are desirable properties to ensure there is always good electrical contact between the slip ring commutators and the brushes. The BRUSH CONTACT RESISTANCE must not be more than 0.2 Ohms. Of course the slip ring commutators are effectively insulated from any electrical contact with the rotor, using paper insulation as is done for a conventional electric motor commutator.

The permanent magnet stators, being the main source of torque exerted on the rotor 26 must be very powerful or else the resulting machine will be weak. In fact,the permanent magnet stators used by the inventor to build the working model of the non-self-sustaining emagnetodynamics machine each had magnetic pole strength that gave an angler deflection of 25 degrees on a magnetometer placed one meter away. The magnets were Alcomax magnets, but of course, since buying these magnets some twenty five years ago,more powerful magnets have been invented in the form of NEODYMIUM magnets.

An Emagnetodynamics machine having only one plane is like an internal combustion engine having only one cylinder, as against the traditional four cylinders, four stroke engine or a conventional electric motor running on only one coil. The practical Emagnetodynamics motor must have many planes, at the very least, four planes in order to produce enough torque on the rotor 26 resulting in a powerful machine. The more the number of planes, the more powerful the resulting machine and it is desirable to build machines with as many as 10 to 20 planes even though MAGNETIC SHIELDING becomes of critical importance in order to shield the magnetic fields created by one plane from influencing the fluxes in an adjacent Plane.

Reference fig. 21 of the invention. 51, 52, 53, 54 are electromagnet stators of a one plane machine. While 51, 52, 53 are all connected in parallel and energized together, 54 which is the release electromagnet is energized separately in a different circuit. It is found that for the system to rotate, some 120V must be fed to the three stators while 72V must be fed to the release stator 54. The current flowing in the first circuit as measured by ammeter Al is 45A, while A2 read 6A.

If the power developed by this machine, rotating at 300 rpm is calculated it will be as follows:

1. 240V source is the main power input to the motor

The control or auxiliary input to the motor supplies relatively negligible power when K2 is closed from the motor position at mmf axis of S2 to mmf axis of S4.

Power output of the motor is Rotor Torque times Rotor Speed in radians per second

Pout = T x [omega] = T x ( 300 x 2 [pi] ) / 60 = 10 pi T watts.

3. Assuming lossless machine, Input Power = Output Power,

Power from S1, S2, S3 = 45 x 240W = 10800W.

Assuming that K2 is on for [theta] radians per revolution (from S2 axis to S4 axis), or 120 deg.,

power from S4 = 72 x [theta] / 2 [pi] x 6 W = 68.75[Theta] W. = 144.4W

(a) Percentage of power attributed to S1, S2 and S3 = 10800 x 100 / ( 10800 + 68.75 [theta] ) =98.7%

(b) Percentage of control power attributed to S4 = 68.75 [Theta] x 100 / (10800 + 68.75 [theta] ) = 1.3 %.

FROM THIS RESULT IT IS CLEAR THAT IF A SMALL FEEDBACK GENERATOR IS LINKED TO THE ROTOR SPINDLE, IT WILL SUPPLY THE 1.3% POWER REQUIRED TO WORK THE RELEASE ELECTROMAGNET AND IF WE REPLACE THE ELECTROMAGNETS S1, S2, S3,WITH PERMANENT MAGNETS, WE HAVE A MACHINE WHOSE EFFICIENCY IS WELL OVER UNITY.

Section 5

A different version of the self sustaining Emagnetodynamics machine can be built by adding a current booster in the circuit of the feedback generator The output of the feedback generator is then fed into a PULSE CIRCUIT,such as shown in fig 21 A pulse circuit is simply a circuit in which electrical energy is stored in a capacitor and discharged very fast A large current flows for a very brief period Since the release of rotor required at backlash points boils down to ACTION AT A POINT, lasting only a few milliseconds, the current pulse so produced is enough to free rotor at backlash points.

DECEIT OF ENERGY

It can also be argued that the selfsustaining emagnetodynamics machine
Os exploits the principle of deceit of energy This is explained this way

In the conventional electric motor, full current must flow through the coils at any and every instant for the motor to function. This means HEAVY ENERGY must be constantly supplied to the electric motor. For the emagnetodynamics machine, it is not so. We do not need heavy energy at every instant. We need heavy energy only at the point where we need to secure the release of rotor vanes from the decelerating effects of backlash. For a machine rotating at a speed of 600 rpm or example,we need heavy current for how long ?

A machine running at 6OOrpm is doing 10 rps. The diameter of slip ring commutator is 60 mm and the width of distributor is 20 mm. So this distributor makes contact with a carbon brush for 0.01 seconds. This is one hundredth of a second, which is very short indeed. This is the PULSE DURATION. Besides or the rest of the time that one revolution lasts, the permanent magnet stators supply the torque needed for motion. The energy stored in the permanent magnets is converted to mechanical energy.

The Television also uses the concept of DECEIT OF THE EYE. Small spots from an object hitting the retina, stay on for a few seconds. If this happens fast enough, different spots appear continuous and the eye "sees" the whole picture as one.

One can say that the emagnetodynamics machine sees the pulse of energy appearing at the backlash points as one continuous chain by virtue of energy gaps covered by the permanent magnet stators

Section 6

The advantages of the sel sustaining Emagnetodynamics motor,over and above the conventional electric motor is obvious. It means this motor can replace electric motors wherever electric motors are being used presently. This includes but are not limited to electric cars, trains, trolleys, electric fans, etc. Miniaturised emagnetodynamics machines, if they can be built, will also replace electric motors in clocks, grinding machines, toys, etc. It could also be possible to install small emagnetodynamics machines to supply current to television sets and radios, so we can have these important gadgets that do not require electricity or battery to operate. Indeed the emagnetodynamics machine possesses the capacity to radically change the way we live. The energy saving for mankind will also be enormous. In a world where energy is scarce and costs so much, apart from its capability to disturb world peace, a machine that needs no external energy input to function will be of great interest and industrial value.

The theory of Emagnetodynamics and the successful design of the Emagnetodynamics motor,which took thirty-one years to accomplish, opens a new field of learning in science and engineering. This is a field that needs to be more deeply explored by scientists and engineers around the world. The inventor has found the field very interesting and exciting indeed.

More research work in this area will include, but not limited to, finding out the detailed characteristics of the Emagnetodynamics machine and just how they compare with those of the conventional electric motor and internal combustion engine.

To build compact and sturdy Emagnetodynamics machines, new and more efficient process of magnetic screening will have to be invented, along with more powerful and sturdy permanent magnets. That does include the invention of current-rich dc generators to work the Emagnetodynamic machine.

Section 7

In broad embodiment, the invention is a motor that works on the principle of interaction of permanent magnets, or even electromagnets, utilizing the laws of Emagnetodynamics as against the force exerted on a current-carrying conductor in a magnetic field.

The theory of Emagnetodynamics is also a product of the inventor's research with magnets which lasted thirty-one years.

Another version of the machine uses no vanes. The soft iron slabs are pasted on the rotor as angular dispersions. The rotor itself is made larger in diameter to accommodate this change in design. This version also has only two split ring commutators, much like the conventional electric motor. The planes could be up to 30 or more and this leads to a more sturdy and simple powerful machine that does over 2000 rpm.

---

http://www.overunityresearch.com/index.php?topic=448.0

MileHigh
Position: Hero Member
Nigerian free energy scam
« on: 2010-12-10, 14:21:48 »
   
Some of you might be aware of the story about the Nigerian schoolgirls that allegedly made a free energy machine.  Our comrades at EF have been following up on this and the trail has led to a person named Ezekiel Izuogu.  This person has a new free energy machine that can allegedly power a house.  I think that we have all heard that one before.

Somebody got a letter from him with the details:

http://www.energeticforum.com/renewable-energy/6841-lockridge-type-principal-device-tesla-self-run-motor-generator-5.html#post121134

Quote
Dear David,

Thank you for your further enquiries on the M-1000.The designs for a practical and commercial prototype which is the M-1000/450,are ready
and a working model can be produced in 2 weeks.This is because the machine has no more than 10 parts.

But the snag is that it is a patented product and if you wish to produce for commercial purposes the law demands that you sign a licensing with us.IF HOWEVER YOU WISH TO PRODUCE JUST ONE FOR YOUR OWN USE,YOU MAY NOT NEED A LICENSING AGREEMENT BUT YOU WILL HAVE TO PAY US FOR LIMITED RIGHT TO PRODUCE OUR DESIGN,WITH AN UNDERTAKING NOT TO
COMMERCIALISE.

We can give you right to produce for personal use for just $100,000.00 with signed full money back guarantee.

Machine will serve you for a minimum of 30 years with no external energy input.

With a good mechanical engineering/production workshop,machine can be produced and working in a minimum of 2 weeks and maximum of 4.

If you have any more questions,do not hesitate to get in touch.

Sincerely,

ezekiel

The above represents the lowest of the low in the free energy cottage industry.  This guy Ezekiel is hoping to strike it rich by finding a wealthy and gullible person that would be stupid enough to send him a bank transfer for $100,000.  Then he will simply disappear.  It's noteworthy to mention again that the trail started with the two Nigerian girls.  The two girls don't have a small free energy machine, the whole thing is a scam.  Reporters that have no technical knowledge can easily be manipulated into publishing articles about stuff that isn't real, it happens all the time.

MileHigh

12-09-2010
Slovenia Slovenia

According to the Nigerian inventor, Ezekiel Izuogu, he has a new machine almost ready for release to everyone. It is much larger than the earlier model perpetual motion generator that had a 60mm rotor. The rotor on the new machine will be 1000mm in diameter instead of 60mm. It will power a Japanese generator with the energy guzzling parts removed. So, maybe we should wait on the details of the new machine instead of jumping on the old one. Supposedly the new machine will power a small office or regular size house. So, that's an interesting update indeed.

Originally Posted by nenergy View Post
I had talked to a few Nigerians online and they gave me some more leads to follow.

This is the same generator that was designe by Joshua Uhuotu Toluwani Ojapa, and Funmilola Olanrewaju Lawal.

YouTube - Intel ISEF 2009: The Design and Construction of a Fuelless Power Generator. This video details the operation of the generator, they also have a schematic, I am still waiting for it.

http://www.youtube.com/watch?v=ZzOV6dFAcsw

==

US Patent Application 20100141073

THE IZUOGU MACHINE (THE SELF-SUSTAINING EMAGNETODYNAMIC MACHINE).
MX2009013309

LA MAQUINA IZUOGU (LA MAQUINA EMAGNETODINÁMICA AUTO-SOSTENIDA)
CR11192

The izuogu machine (the self-sustaining emagnetodynamics machine)
AU2007209814

THE IZUOGU MACHINE(THE SELF-SUSTAINING EMAGNETODYNAMIC MACHINE)
KR20100046134

---