The treatment frequencies are all
approximately 10 times the ones listed in the modern Crane
derived frequency lists for various conditions.
This begs the question of how effective
these frequencies are in practice. During testing, a
person with Candida was present during measurements.
That person told me that they felt a strong reaction at a
particular setting (the person did not know what frequencies I
was using) - I noted that the setting in question was
approximately 4640 Hz - which is exactly 10 times the common
frequency of 464 Hz which is used for Candida in modern
machines. To test the thing further I tried tuning the
machine deliberately to 464 Hz (without the person in question
knowing the setting) and the subject reported that there was
no reaction. So the machine only seems to work on 10
times settings. I discovered exactly the same
phenomenon in myself during subsequent testing.
I have recently concluded that "MOR's"
are not necessarily fixed and universal constants. I now
believe that MOR's are specific to each machine and that the
machine needs to be tuned to operate in a specific range
- see my paper "Rife's Missing Link" for more details on this.
The most striking thing about the Beam
Rays circuit at first glance is the oscillator section.
The machine oscillator is clearly a first generation Hewlett
Wein Bridge circuit. What makes this particularly
notable is that Hewlett (Hewlett-Packard) only invented the
circuit around the time the Beam Rays machine was built.
Because it was so new and had not found its way into
commercial designs it tends to imply that there might have
been some connection between Hewlett and Beam Rays. I
have written a detailed account of the history entitled "The
The earlier Rife machines had used the
Hartley oscillator circuit which was nowhere near as stable as
the Hewlett Wein Bridge. So the use of this circuit was
a big step forward for Beam Rays. The earlier
machines had been plagued with apparent frequency instability
which made consistent use very difficult. The Wein
bridge circuit was an apparent solution, but in practice there
was another factor that they apparently did not take into
The Beam Rays oscillator is remarkably
stable --- it drifts by only a few Hertz during normal
operation and is superior to many modern analog
generators. But it has one major drawback. Tuning
is achieved by way of a variable capacitor. This
capacitor is connected directly to the tuning dial. The
tuning dial is a geared down dial that allows very precise
turning of the capacitor shaft. However in practice it
suffers from a slight degree of "backlash" - in other words,
no matter how carefully you turn the dial, there is always
some residual pressure on the rotary shaft - and left to
itself for a while this residual pressure or tension causes
the capacitor shaft to turn back by a small amount. This
is enough to throw the tuning out by a couple of Hertz in the
lowest range - and the problem multiplies by a factor of 10
for each higher range. So in the top range the backlash
can throw the frequency setting off by approximately
2KHz. In addition, because the relationship between the
dial setting and the actual frequency is non-linear, the
problem is always worse toward the top of the scale (i.e. the
dial is calibrated from 0 to 100 - the problem is much more
pronounced near 100 than it is near 0). One of the ways
in which this manifests most noticeably is that turning the
dial down from a higher number results in a lower overall
frequency than turning the dial up from a lower number to the
same final setting.
The frequency setting is obviously
critical and this may explain why some frequency stability
related problems were encountered even with this extremely
The presence of the Hewlett oscillator
explains also the general build of the machine.
When I examined the machine there were various minor
anomalies. One of which was the size of the two
chassis. They are both much bigger than they need to
be. Also there are two separate chassis and the
earlier Beam Rays machines had only one. Another thing
is that there is a circuit on the oscillator stage which is
not connected and not used. This was probably meant to
be able to create square waves by sine overdrive and
clipping. Finally the mounting holes on the chassis do
not correspond with the mounting holes on the case - someone
has drilled new holes in both chassis to remount them in the
case. This could mean that the case the machine is in is
not the original case it was shipped in. Alternatively
it could mean that the chassis were previously mounted in a
different way (maybe in a different case) prior
Taking all these things together leads me
to the conclusion that the machine I examined is probably an
original prototype. This makes sense considering that
the Hewlett oscillator was so new. Obviously, Phillip
Hoyland or whoever built the machine decided to try making the
oscillator stage separately from the output stage. The
output stage is presumably the same as in earlier Beam Rays
machines (it looks the same as a 1937 Beam Rays machine), but
clearly they decided to build the oscillator on a separate
chassis. The chassis were overlarge to allow for circuit
expansion and modification. The unused circuit was
probably tested at some point and found to be
unnecessary. And it is likely that during
development the different mountings were used on some sort of
open frame to allow testing and measurement.
But this prototype machine was shipped
and sold as a finished unit, why? The answer is probably
quite obvious. The machine was produced during the great
depression. Everything was expensive, Beam Rays
was a small company and needed to keep down costs. The
prototype was probably only needed during
development. Once everything had been worked out
satisfactorily, the prototype was no longer needed - and could
be sold for a substantial profit, as it was effectively a
working machine of a new design.
The 6SJ7 and 6K6(B) tubes on the combined
schematic are the basic Hewlett Wein Bridge oscillator
circuit. See "The Hewlett Connection" for a schematic of
Hewlett's patented design. The third tube marked 6K6(A)
is a simple cathode follower buffer stage, analogous to a
modern transistor emitter follower circuit. This circuit
has high input impedance, low output impedance and unity
gain. It is designed to insulate the sensitive
oscillator section from the following output stages. The
6SN7 tube is the unused circuit and as mentioned above was
probably meant to be part of a fast clipper amplifier to
produce square wave modulation.
The oscillator stage creates a pure sine
wave from approx 20 Hz to 200KHz depending on range and dial
setting. It also produces a variable amplitude output
which can be adjusted from 0v right up to approx 50V peak to
The output stage consists mainly of a
single 812A power triode. The stage is self-oscillating,
it has a simple regenerative feedback arrangement from plate
to grid via two capacitors and the tank coil. The degree
of feedback can be adjusted by means of a large power resistor
from the grid to ground. Note: the machine was not
actually grounded, the negative end of the supplies connected
to the chassis and all "grounds" were actually referenced to
the chassis. I found in practice that the chassis did
tend to accumulate quite a nasty residual charge after the
machine had been operating and so I grounded it which did not
seem to affect the operation of the machine. The output
stage is actually a Hartley oscillator, although not obviously
so, because the output capacitor in series with the plasma
tube capacitance represents the "tuning" capacitance of the
circuit. The large power resistor in series with
the tube affects the oscillator loading, the output field
impedance and also the Q of the resonant circuit.
Because the plasma tube is an active circuit element,
capacitive coupling from any body in the vicinity of the
plasma tube actually causes changes in the oscillator
frequency. The "resting" frequency of the output
oscillator is around 3.3 MHz - I suspect the machine was
actually designed to operate principally in the 80 m radio
band (between 3.5 and 3.7 MHz).
The output from the modulation oscillator
stage is capacitively coupled to the output triode grid via an
inductor. The latter is designed to prevent the carrier
oscillations from feeding back into the modulation oscillator
The DC HT power for the 812 triode is
derived from a 1235 VAC plate transformer by two 866 mercury
vapour rectifiers. The DC output is smoothed via a large
choke and a filter capacitor to ground. There is also an
RFC choke in the line to the plate. The smoothing
circuit is not very efficient and has a lot of mains frequency
ripple - this is not completely unexpected in a circuit
running at such a high voltage (nominally 1750 V DC) due to
the cost of larger HV capacitors. However much more
interesting is the other end of the tube - the filaments
(which double as cathodes) are connected to a direct AC
filament heater transformer which means that there is an
additional modulation at the 60Hz mains frequency (cathode
In practice during operation, the machine
creates the carrier waveform (which is not very clean and
contains a lot of harmonics - it has a superficial similarity
to a sawtooth wave). The carrier is then amplitude modulated
by the sine wave produced by the modulation
oscillator. However, in addition, the AC cathode
connection causes a further modulation at 60Hz. In
effect the modulated wave is chopped into chunks or bursts
that are one period of a 60 Hz cycle apart. And
the envelope of the wave is effectively the first quarter
cycle of a 60Hz cosine wave. In some respects this is
like a very crude approximation to a damped wave. I
believe that the latter is not a design flaw but rather a
Pictures of an Original 1947 Rife Device
This unit was manufactured in San Diego California for a Dr. in
1947.The large phanotron tube for it was made in Los Angeles. It
was in constant use until the Dr.s death a few years ago. This
device is very similar to a recently discovered 1939 unit. The
1939 unit has a fixed carrier frequency of about 4.6 Mhz. There
are two other primary harmonics within the carrier of 2.15 and
9.09 Mhz. The carrier is Amplitude Modulated using a
Hewlett-Wein Bridge Oscillator. Controls for the Hewlett
oscillator can be seen on the front of the device. The knob on
the Left changes the frequency band, while the knob in the
center adjusts the audio frequency. Frequency range is from 16Hz
to 200 KHz. The knob on the Right changes the amplitude, or
audio power level. Optimum effects are found using 100 %
modulation, and not overmodulation. Sine wave modulation, and
not square wave modulation is used.
The output wave of the device is gated at the AC line voltage
frequency. For the USA, this would be 60 Hz. Each series of
pulses within the gated envelope, is composed of a damped wave
train. The three harmonics of 2.15, 4.6 ,and 9.09 are all
modulated. Damped wave transmitters are now outlawed by all
countries via international treaties.
The plasma tube behaves as an active part of the circuit, and
when placed close to the patient, couples the field to the
patient. A curiosity is that frequencies utilized by this device
are TEN TIMES the frequency that is presently used. For example,
this device uses 21275 Hz instead of 2128 Hz. Please visit this
web site for a more in depth description of the device.
The 1939 Beam Ray Machine
In 1938, A group of British researchers headed by Dr
Bertram Winter Gonin, sought to buy some experimental machines
from Rife to confirm his work. At that time, Rife had no
commercial operation capable of handling the orders, and at the
instigation of his old friend Ben Cullen, Rife consented to the
formation of a commercial company called Beam Rays Inc. At
that time, the majority owner of the rights to the machine was
an electronics engineer called Philip Hoyland. Hoyland had
designed and developed all of the original Rife machines since
late 1934. Hoyland and Rife became partners in Beam Rays
Inc. The company produced a small number of machines but
suffered internal conflicts because of the actions of some of
the other partners and because of frictions between Hoyland and
Gonin's group. Hoyland believed that Gonin and his
partners were trying to steal the technology for
themselves. Subsequently, the company was destroyed in
1939/1940 when Hoyland brought a lawsuit against Beam Rays in an
attempt to stop one of the partners from illegal stock trading
and also to dissolve the contract with the British. Fuller
details of this are being written up and will be posted here in
the near future.
The Beam Ray Corporation produced a number of machines.
I'm not sure of the exact number as I have seen varying
accounts, but I believe that about 17 machines were produced and
shipped to MD's in California. Another four machines were
shipped to England to Dr B. Winter Gonin of the London School of
Tropical Medicine. There was some argument between Rife
and Hoyland over these machines and their operating principle,
however various MD's including James Couche used one of these
machines for many allegedly successful treatments of patients
for many years.
The U.K. Rife Research Group managed to get access to one of
the machines believed to be one of the originals that were
shipped to California in the late 1930's. I reverse
engineered that machine and present the results below. I
have a lot of data on this machine of which this is only part, I
will add things as I get time as much of the data needs to be
organised properly. The exact date of the machine is
unknown - we know that it was built sometime between the autumn
of 1938 and the early part of 1939 - so it may actually be a
I would like to express my thanks to Robert Harrison, an expert
valve/tube engineer (I'm not a valve/tube expert) who gave me
massive help and support during the reverse engineering process
and who corrected numerous silly mistakes that I made! My
thanks also to Stuart Andrews and Bob Haining for their help and
support in this effort.
Output Stage Scematic: http://www.scoon.co.uk/Electrotherapy/Rife/BeamRay/output.pdf
Complete Schematic: http://www.scoon.co.uk/Electrotherapy/Rife/BeamRay/complete.pdf
Original Plasma Tube Schematic: http://www.scoon.co.uk/Electrotherapy/Rife/BeamRay/ptube.pdf
Waveform Photographs: http://www.scoon.co.uk/Electrotherapy/Rife/BeamRay/Waveforms/index.htm
Booster Amplifier Schematic: http://www.scoon.co.uk/Electrotherapy/Rife/BeamRay/booster.jpg
Machine Description & Analysis: http://www.scoon.co.uk/Electrotherapy/Rife/BeamRay/Analysis/index.htm
The Royal Rife Story
Produced by AAA Production --- 336 East 200
Sq Price, Utah 84501 To order
video call 888-436-4420
The Cancer Cure That Worked
( ISBN 0-919951-30-9 --- © 1987 – 2000 )
The Frequency Instruments were steadily improved from the early
version of 1920 to the clinical versions of 1934-38 and then, in
the 1950s, improved again to the point where Rife could assert,
"they are infallible and simple to operate."
The May 6, 1928 Evening Tribune of San Diego described
what the Frequency Instrument did:
"Just what this Ray does to the organisms to devitalize them is
not yet known. Because each organism requires a different wave
length, it may be that whatever befalls these tiny slayers of
man is something similar to the phenomenon occurring when the
musical tuning fork is set in vibration by sound waves emanating
from another fork struck nearby. ...
[ This at the time was a good explanation and still has some
validity. But, (it) is very incomplete. The effect is
multifaceted. — James Bare — ]
"Rife thinks that the lethal frequencies for various disease
organisms are, as in the sound waves, coordinates of frequencies
existing in the organism themselves. If this is the explanation,
it means that the Rife Ray probably causes the disease organisms
to disintegrate or partially disintegrate, just as the vase and
the glass. Several bits of evidence indicate that this is
exactly what happens. ...
"When the ray is directed upon them, they are seen to behave
very curiously; some kinds do literally disintegrate, and others
writhe as if in agony and finally gather together in deathly
"Brief exposure to the tuned frequencies, Rife commented,
brings the fatal reactions. In some organisms, it happens in
"After the organisms have been bombarded, the laboratory
reports show, they are dead. They have become devitalized — no
longer exhibit life, do not propagate their kind and produce no
disease when introduced into the bodies of experimental animals.
"Now, he reported, the mortal oscillatory rates for many, many
organisms have been found and recorded and the ray can be tuned
to a germ's recorded frequency and turned upon that organism
with the assurance that the organism will be killed."
In 1950, after an absence of four years, including two years in
an alcohol rehabilitation "prison" from which he finally
escaped, Rife returned to his great work. In 1953, his cancer
report was published — History of the Development of a
Successful Treatment for Cancer and Other Virus, Bacteria and
Three years later, in 1956, he wrote a letter describing the
safety of the Frequency Instrument and also its advanced
"I have operated the 'Frequency Instrument' since 1921. I have
watched it advance in style and performance with the advancement
"In the many years I used this equipment in my research, I have
never suffered an injury or any ill effects whatsoever. I found
it reliable in performance and efficient in results. The most
recent model is infallible and simple to operate."
[A] new Frequency Instrument was finished in September 1935 …
Milbank Johnson explained the process:
"The new Rife Ray Machine had arrived at its point of
construction, when elaborate tests had to be made in order to
synchronize the M.O.R. produced by it with the M.O.R. produced
by the old machine. Now, we are in the throes of accurately
charting the 14,000 possible settings on the new machine. Our
next process, beginning next week, is to test its penetration,
the time required in the different exposures, the different
depths of lesions. So, take it altogether we are just about as
busy as a bear in berrytime."
Rife provided a brief description of his old Frequency
"The basic principle of this device is the control of a desired
frequency. These frequencies varying upon the organism being
The frequency is set which controls the initial oscillator,
which in turn is run through six stages of amplification, the
last stage driving a 50 watt output tube.
The frequency with its carrier wave is transmitted into an
output tube similar to the standard X-ray tube, but filled with
a different inert gas. This tube acts as a directional antenna.
The importance in the variable control of these frequencies is
that each pathogenic organism being treated is of a different
chemical constituency, the consequence being they carry a
different molecular vibratory rate. Each one in turn under these
conditions requires a different frequency or vibratory rate to
The new instrument was light-socket powered and had an output
of 500 watts. Furthermore, it was equipped to deliver two
distinct frequencies simultaneously and both variable. [ There
were two output tubes places next to each other. ] This
apparatus proved to be more efficient with decidedly fewer
factors of error.
On May 28, 1937, Dr. Milbank Johnson ... wrote to his friend
Dr. Joseph D. Heitger in Louisville, Kentucky, the eye
specialist to whom he had sent Rife:
"I closed my clinic on May 28, having been running it for eight
months. Our special effort this past winter has been working on
cataracts, and while we have treated a number of other
infectious conditions (if cataract is an infection), still our
principle work has been on the eye.
The application of the Rife Ray as we have used it, does, in
the majority of cases, restore the full visual function of the
eye; that is, the portion of the visual disturbance due to
opacities in the lens. How it does it and why it does it, I do
not know, but the above statement is an actual fact, supported
now by many cases.
How I wish we could get together and go over this work. I
believe it will result in epochal changes in the profession's
handling of cataract cases."
[ I think Jane Kress' find regarding nano-bacteria is relevant
Ben Cullen, the present of Beam Ray, later recalled what
happened once Dr. Hamer had his own office:
"Hamer ran an average of forty cases a day through his place.
He had to hire two operators. He trained them and watched them
very closely … Hamer was very well known on the Pacific Coast.
His case histories were absolutely wonderful.
We would go in there and see rectal cancers and stuff of that
sort. He cleaned them up completely, absolutely clean. People
would come in there with syphilis — not for that purpose — but
those that had developed cancers, he'd find they had syphilis or
gonorrhea. By golly he'd clean those up completely. Not a
doggone taint of it in the blood stream at all. Clinically
I would go down to Dr. Hamer and he would painstakingly pull
out those case histories showing improvement day by day of
everyone of them."
Royal R. Rife
Gerald F. Foye
( ISBN 0-9659613-3-8 --- © 2001 )
Rife studied …
[Cancer], Tetanus, typhoid, gonorrhea, syphilis, staphylococci,
pneumonia, streptococci, tuberculosis, sarcoma, carcinoma,
leprosy, polio, cholera, actinomycosis, glanders, bubonic
plague, anthrax, influenza, herpes, cataracts, glaucoma,
colitis, sinus, ulcers, lock-jaw bacillus, and many other virus
bacteria and fungi.
[ He was successful — using simple electronic equipment — in
destroying them all without any significant side effects. The
reason he was so successful was that his microscope allowed him
to watch the living pathogens while he subjected them to
resonate energy. ]
One issue modern, orthodox medicine still fails to accept or
take seriously, is "cause" and "maintenance". That is to deal
not just with surgery of sick tissue; but, to deal with the
cause of the problem, to try to prevent it in the first place;
and, further, to try to prevent it from recurring!
Rife was able to prove that virus forms could be altered with
chemicals. Thus, he could create disease-producing viruses by
manipulation of chemical structures. Again, he proved this
Rife stated viruses to be a group of chemical constituents,
which could be altered by applying specific chemicals — parts
per million — creating different organisms. By applying the
proper chemicals, Rife could alter a given microorganism into a
specific pathogen, at will, and back again; as long as they were
within a specific group, of which Rife had identified about ten
groups at that point.
Inoculation of experimental animals had demonstrated the
disease causing properties of each virus isolated, according to
Rife stated he worked seven years straight and studied 20,000
cultures searching for a cancer virus, finally suspending the
search since he had found nothing.
Rife was later joined by Dr. Arthur Kendall, head of the
department of bacteriology at Northwestern University Medical
College. Dr. Kendall suggested a culture medium [ his K-medium —
a protein mixture ], which proved to be the secret to success as
Rife was able to press on and did eventually discover and
isolate the cancer virus.
Rife commented that his special illumination (under his scope)
reveals the filter-passing organisms in individual,
characteristic colors. He stated that no two kinds or forms of
organisms have been found to have the same colors. However, one
form was found to have dual colors. The center portion of the
rod form responded to one frequency (of illumination) while the
ends responded to another. This required dual frequencies for
devitalization. (If the two frequencies are used simultaneously
or one after the other over the same carrier wave, the patient
According to Rife, if a single frequency was applied and that
portion of the organism was devitalized, it would release the
other constituent. Depending on which constituent was
devitalized, either nothing would happen or the patient would
die! [ His lab animals ]
The reason for the above, according to Rife's explanation is,
if the bacilli of tuberculosis is killed, a virus — the 'poison
of Vaughn' — is released which reacts with the dead bodies of
the rod form and produces toxemia and death.
"It was found that by using combinations of these frequencies
for different microorganisms that many other diseases could be
helped like sinus, ulcers, cataract, arthritis and
Each pathogen or virus has a frequency of its own — natural
resonate frequency. A healthy cell has a frequency; but, when
that cell becomes contaminated or altered, the frequency is
That is one reason why frequency treatment can safely be
applied. The correct frequency will affect only the unhealthy
cell, or diseased tissue, while leaving healthy areas untouched.
Rife proved this beyond any doubt. Still the closed minds of
higher medical superiors would like us to believe frequency
healing is unsafe.
In some cases, frequency treatments result in virus destruction
and rapid recovery. In other cases frequency healing appears to
work by alerting the depressed immune system to become more
aggressive, thus causing the immune system to attack the disease
as nature intended.
Rife made a statement that patients who had radiation
treatments prior to frequency therapy, did not respond well to
frequency therapy. Rife also stated that he could detect
radiation in organ tissue up to six months after radiation
therapy; and, up to two years after radium therapy.
Another intriguing discovery made by Rife was polarization of
microorganisms. Under the scope, if polarity was applied, the
constituents would separate to the poles; a portion to the
negative pole, a portion to the positive pole. Neither would
culture individually; but, placed together, they would culture
into a microorganism structure. As Rife put it, sort of, "male,
Another important discovery was the pH factor. (Acid-base
balance.) Rife stated if the pH was neutral he could not produce
a culture. But, if the Ph was altered to either base or acid, it
would culture. Based on this information, Rife felt that if the
human body remained in a neutral pH state, it was impossible to
develop a disease.
Correspondence from Milbank Johnson to Rife, 1935: "Now that we
have a machine in which we can give two frequencies at one time,
it would be easy to treat all forms of tuberculosis both for the
tubercle bacilli and Much's granules." (Granules in sputum from
TB patients, possibly degenerated tubercle bacilli. Re: Dr. Hans
Rife: "I studied leprosy and I isolated a virus which we
jointly demonstrated was common to rat, soil, and human leprosy
and I found a frequency which would eliminate leprosy."
A doctor in Dayton Ohio; I have used it on several persons with
fungus infections of the feet (athletes foot). The results in
the fungus cases have been most spectacular.
Here is an excerpt of a letter from one doctor to another
doctor, dated June 1, 1937;
"We treated the 'dewy' cornea condition empirically with the
same MOR that we used on the cataracts and the dewy condition
disappeared very promptly …
Every case we have treated, with the exception of one which was
a traumatic cataract where the lens was absolutely opaque and of
recent origin, has benefited. The process of coagulation has
been stopped and there has been a distinct retrogression of the
opacities resulting in most cases, in a complete restitution of
the function of the eye."
The Case For Audio Frequencies:
Among researchers of Rife technology, debate continues
regarding the issue of audio frequencies. Here are statements
from Rife taken from an interview, which took place in Tijuana,
Mexico. (There is no date on this document. But, it must have
related to the John Crane trial of 1960–1961.)
"Initially, I (Rife) worked with loose couplers to get an audio
oscillation and then with the use of transmitters I tried to
balance the audio and modulate the audio on a carrier wave to
transmit the audio energy. But, I found that both the audio and
the audio transmitted through a tube as an antenna worked
equally well in a painless and harmless method to human tissue."
Thumbing through the pages of historical data regarding Rife,
Crane and frequency technology, one issue stands out, clearly —
lack of stability.
It seems this problem prevailed through the years. Researchers
would achieve marvelous results for a period of time, then,
suddenly the system would fail to produce much of anything. Even
from one day to the next.
This seems to still be "somewhat" true with our meager
equipment and attempts at repeatability. It's not so much a
failure of the technology; but, appears to be an atmospheric
variation and other surrounding conditions. Changes in
atmospheric pressure, temperature, magnetic earth fields and
other surrounding natural forces affect electronics in strange
A suggested approach is to begin at 20 Hz and work up in 10
cycle increments. … It is suggested (that) a beginner should
avoid frequencies above 5,000 Hz. Interestingly, an amazing
number of pathogens seem to respond in the low range from 20 Hz
to 900 Hz.
[ The healing power of sound comes to mind here. ] [
My work with resonance has proven to me that intervals of 5 Hz
or even less might be more appropriate. — Tommy C. —
A duration of 3-minutes is standard protocol while searching or
scanning for a usable frequency.
Report of the British Rife Group
( Presented to the International Rife Technology Conference,
Las Vegas, March 2002 )
[ This report is a pdf file and has pictures, schematics with
part values, plus functional circuit descriptions, along with
circuit wave form pictures. The "Plasma Ray Tube" itself
is currently being manufactured. ]
... The use of a Wien-bridge oscillator in this machine [an
original 1939 unit discovered walled up in the closet of a
former Doctors' surgery in Britain ] gives us our first and most
surprising conclusion: that beam ray machines used sine waves,
and NOT square waves! ...
Another surprise followed when we set the Wien-bridge
oscillator to the dial settings for BX [the cancer virus] (band
4, dial 10) given on the hand-written pencil notes [found with
the machine]. We obtained a frequency of 21,275 Hz or
21.275 KHz. We then set the machine to the other dial settings
in the notes, and found that in all cases the active frequencies
produced by this 1939 machine were 10x that of the standard
Crane-Stafford frequencies of the 1950s.
This reminded us of a very strange letter written by Dr.
Millbank–Johnson on November 4th 1936. Johnson stated that while
working in the laboratory, they had found "a new wave band" of
frequencies. Johnson goes on to mention that this new band broke
glass in the laboratory.
Frequencies of 21,275 Hz etc. are supersonic [ultrasonic] in
that they cannot be heard by the human ear. But, when generated
at a sufficiently high amplitude, they have the capability to
cause resonant destruction of glass and other fragile materials.
Our conclusion then, is that this explains the effect that
Johnson observed in 1936.
The use of 10x Crane frequencies may be of great significance
to the actual operational uses of modern Rife technology. We
urge researchers to try this out. ...
On the Issue of Stability
... the main RF tuning capacitor C1 is series fed to ground by
the plasma tube (at Jack point J1). This means that the plasma
tube itself forms part of a variable capacitor, and that it will
be reactive when brought near any object or patient. This means
that the main frequency tuning of the RF oscillator will change
according to the individual capacitance of a patient [or weather
conditions]. We believe this to be significant, particularly as
contemporary accounts describe the tube being placed within 10
inches of the patient.
... The 812A triode produces an output in the region of 40
watts RF, and Rife researchers will appreciate that this is a
far lower power [level] than we have been led to believe was
used in 1939.
Tec Talk --- Engineering Rife's
We know, that Rife's "ray machine" was generating a special
form of light. However, Dr. Rife lacked the language and
paradigm to properly describe what he was seeing and
doing. [ The fact that the rays would penetrate metal
cabinets is an important clue. ]
The scientific community was introduced to this paradigm, when
the study of "Superconductivity" was undertaken. Here we learned
about "Cooper Pairs" — pairs of electrons with complementary
spins that are coupled together magnetically. We learned that
current only flows through a superconductor as Cooper Pairs —
single electrons find super conducting materials to be a perfect
We then learned, that light was actually Cooper Pairs, which
have been given oscillatory energy —(any part of the
electromagnetic spectrum)— and accelerated away from their
source. This is what gives light its wave properties — what are
known as "Hertzian Waves". (I then realized what was
going on within the broadcast equipment that I shepard.)
Cooper Pairs can also be accelerated in a straight line, giving
them the properties of "rays" and "beams". Our tube TV's are
designed to safely do this, in order to scan a picture for us.
Cooper Pairs are formed in a vacuum, and then are accelerated
and focused on a phosphor coating to produce the picture. Change
things around a little bit and you have an X–Ray tube.
Using his special microscope Dr. Rife was able to observe
LIVING organisms — something that an electron microscope can't
do — while he performed his experiments. He learned that because
of their small size, viruses strongly process the
characteristics of crystals, allowing for resonate destruction.
With his equipment, he was able to scientifically determine that
viruses are 2,000 times more sensitive to pulsed electronic
radiation, than our normal cells.
Dr. Rife used gentle, perfectly timed, sine wave pulses of
Cooper Pairs to literally shatter viruses and bacteria, just as
the "Crystalline Entity" was destroyed on Star Trek. The
problem of how to get gentle pulses to penetrate the body
properly and completely was also addressed.
My Work on Rife --- An Ongoing Research
My work on Rife's frequencies involves the use of electronic
interferometry and gating of 3D signals-- not known at this time
in the Rife field. I designed the gated interferometer for my
crystal-controlled amplifier oscillator. This is not "pseudo"
electronics. I hold all rights to this process. Below are
pictures of some of the special functions that can be done. My
work in the beginning involved working with John Crane and Dr.
Strecker in the reconstruction of the virus #3 "Universal"
microscope in the early 80's to develop pumped wave frequency
generators and 4-wave mixing. I had this microscope until Barry
Lynes had it picked up by court order from Crane because John
Crane had sold it many times before. All the parts were
there--the parts that were missing Crane and I made, and John
Crane took them with him when he left. What he did with them
remains unknown to this day. The microscope was taken and never
to be seen again. The only thing left is pictures and no working
microscope. John Crane also had special gas filled Rife tubes
whose whereabouts are also unknown.
If you do not understand interferometry, it is basically the
same system used in some laser systems to produce holograms and
spectrum analysis. I'm only dealing with generating harmonics
and sub- harmonics for research only. .
Rife's microscope may have worked on the principles using
interferometry and this could be why, to this day, the
microscope is not understood. There were many lenses missing and
prisms that Crane and I were building before the microscope was
picked up by court order...
Special thanks is given to James Bare for the special work he
did to make all this happen in the Rife field. Without him you
would not even be this far along. Also, special thanks is given
to Tom Bearden for his insight into the the scalar vector field
and 4-wave mixing using pump waves...
John Crane's Simple Square Wave Generator
Dr. Strecker took care of John Crane while we were working
together. Crane sold us just simple sine wave generators right
off the shelf--they did not work for anything. But don't take my
word for it as to what happened. Talk to Tom Bearden. Talk to
the 18 people that got sued for 20 million dollars. That
was just one of his phony lawsuits and just ended up costing
everybody involved big money.
John Crane was never given any of the circuits that I was
developing at the time. They were potted in block modules
and placed into the machines Crane sold out from underneath
us. In the mean time, John Crane was selling phony square
wave generators for $100.00 each, claiming that these would cure
you. Well, they didn't cure anyone, and people died. When
the FDA showed up, Crane ran as fast as he could. So after
that, I locked the shop up and would never let Crane back in.
Don't get me wrong, John Crane had many wonderful things to
offer the world, but he lost integrity because of the lack of
money. When we were developing the new generators to test on
cultures that Dr. Strecker was in charge of, John Crane
was treating people in the front office against all the rules
and protocols laid out by Dr. Strecker. He would sell the
polarity research manuals over and over to different people, and
these belonged to all of us working on this project. John Crane
was an expert draftsman and could draw anything you gave him. To
draw a microscope was child's play for him to do. Rife
trained him well in all the sciences. I had everything that John
Crane had in his basement to amuse myself with--all the
drawings, pictures, lenses, steam sterilizers, Argon loops, Rife
tubes, test equipment, and many other undisclosed, secret
prototype machines that Rife and Crane were working on...all of
the things the "Rife gurus" have never seen.
My story goes on with some more important things that I have
taken from my lab notes and general discussions with Dr.
Strecker, Crane and others.
The pictures above...this is the way John Crane looked at the
time. Dr. Strecker was in charge of the research and
development. My brother and I closed the doors and moved
the workers to a different building because this was a private
project and had nothing to do with the business we were
conducting at the time. Dr. Strecker was a true believer
in getting this technology out, and so were the 18 people
involved. The first problem with John Crane was to pay his
back rent and and a few other pending bills. Again, John
Crane and Rife had many wonderful proven inventions.
We found John in absolutely filthy conditions, starving.
He was making electrodes by cutting pieces of brass which he
would solder on to the meter probes of an off-the-shelf
frequency generator. Then, he would resell these units
with these probes for $500 along with the polarity research
manual for another $100. In a short time, he'd sell
another 18 units, one to each member of the group.
To walk through John Crane's house was to walk through some
kind of a maze--boxes everywhere, things piled on tables, dust a
half inch thick in some areas, rooms that you could not even get
into, boxes, and more boxes. The front yard was full of
all kinds of different inventions and contraptions.
Whether they worked or not was unknown. Dr. Strecker took
care of Crane, and Crane lived with him day and night at
Strecker's apartment in Little Rock. Strecker would bring
Crane to the shop in the morning and pick him back up in the
evening after we discussed everything that was accomplished
during the day.
John Crane was a true mentor of Rife, and he understood
everything Rife understood because Rife trained him. To quote
Crane precisely, "Rife told me the secret to the machine, and I
know how to build it." So we know Crane understood that a simple
square wave generator would not cure anything . I got
Crane to admit this to me when one day I asked him, "Why are you
selling these simple square wave generators?" Crane
responded by saying, "It works on some people...that's good
enough." Strecker told Crane, "That's not a good thing to
do with people that have cancer or another debilitating
disease." And then Crane would say, "I have given the list of
frequencies." So right there, Crane admitted that the
machine he was selling may have worked for some, but not for
others. Dr. Strecker, at this point, would just shake his
head and walk away, but he was not about to give up his hope to
make this technology work.
I wanted to know what was missing from all the papers Crane
sold everybody. I wanted to know what the real transmitter was
and what was missing from it. (Note that Crane never
mentioned it to John Marsh, Rockwell or anybody else.) Crane's
answer to me about the transmitter was, "It's in the book you
bought right here on this page." I would argue with him by
telling him that the circuit diagrams he was selling were not
even functional. And then I would ask him why the circuits did
not look anything like the real machines did that were sitting
right in front of us. Crane would then just say, "The
square wave generator works better, and you will not cause any
interference with radios...Go ahead hook up the transmitter and
the tube. It's right here." So I hooked it up like
he said, and it didn't kill anything Strecker had in the
incubator at the time--no matter what frequency the dial was set
at. Later, it was found that the generator was not
producing any modulation in the AZ58 machine, so we fixed that,
and it still would not kill anything in the incubator...even
with Crane running the machine.
I think the thing that excited Dr. Strecker the most were the
reports about the microscope. I quote him from my notes,
"I have talked to some people that bought John Crane's
microscopes, and they report that they can see things never seen
before. They say they can get 5000x out of the scope." Now
Crane could have built this scope at the shop with the metal
working machines we had, but he refused for some reason, so we
were forced to buy a regular medical microscope to study the
things we could see. Some of these things can be seen in
Crane's lab notes that are now on Stan Truman's site at
www.rife.org/johncrane.html. These are only a few of
the notes Crane would carry around with him. The one set
of papers that are missing contain all the research work done on
the Risley Prisms and why Rife chose to use them. Could it
be that Rife knew more then he was telling all the medical
people? I think so because of John Crane's comment to me
in my lab notes, "You must modulate this virus with light to see
it. It must become resonate with the light interference."
In other words, you must cause light interference before the
subject would appear. Then, it could be seen in it's own
We are talking about interferometry or
heterodyning. Using this process, one can change the
phases of light, canceling certain frequencies out and adding
others together, i.e. "a special mixer for light". I don't know
of any microscopes that will do this today. There are some
that use ultraviolet and with these you can see the cancer
cells. But so what? You can see them under electron
microscopes also. I want to see the colors Rife talked
about. This is very important because radio waves also emit
different colors as the transmitter is broadcasting. If you
could see an AM or FM transmitter running, each antenna would be
emitting a different color for that frequency in the radio
spectrum. Your eyes just can't see this due to their
The conversations with Crane would continue until the end of
the day. Then I would continue to build the parts for the
universal microscope in the machine shop. It was the prism
holders that were missing, so I worked until they were
done. Everything else was there. Crane then
installed them, but still, nothing could be seen through the
scope. Crane would then start over with drawings.
During these times, he would go back to the office and just fall
into a deep sleep at the drafting table. Upon waking, he'd
say, "It's time for dinner. When are we going to
eat?" It would take half of my day just to get this far
with Crane, but when someone came in the shop that was looking
for one of those square wave generators, Crane was on his
toes. He would walk into the back of the shop and
say, "Don't we have a square wave generator around
here?" Then he'd take whatever was laying around and sell it
when you weren't looking. I would just wait for the next
day when John had gotten everything to eat and a good night's
sleep. Then I'd start the questions again the next
morning. I would cover everything two times with Crane to make
sure that I did not miss anything. The group decided not
to tell Crane about anything when it came to the circuits that
were being developed. They, after all, were paying
the bill for this project. Crane understood this, and, as
long as he had money, everything was alright.
My task was to build the electronic circuits for testing the
Rife technologies. John Crane was never given any of these
circuits, and I always potted them with a compound that would
grind your tools away if you attempted to get into the block
modules. My lab notes were not kept in the building
anywhere for security reasons. I would come back at night
and build the circuits and boards so as not to give away what I
was working on. I worked nights to develop this electronic
heterodyning interferometer unit and when I thought I had it,
Dr. Strecker and I would test it in front of Crane. We did
this many times before we got something to work. When I would
ask Crane about the frequencies and if this is what he wanted to
see on the scope, he would always say yes. Then Crane made the
significant comment, "You need to understand that you must mimic
the microscope in what it does to light up the virus so you can
see them. The machine must work on the same principal as the
microscope." Immediately, I stopped what I was doing and
had to go sit down and think about what he had just
said. This is not written this way anywhere until
now for the first time. (James Bare said that this is in the
Rife, Thompson, Marsh patent application.) The next two
days I kept going over this with Crane and he would add a little
more each time, "Dr. Rife understood what made up the bacteria
and virus that he wanted to kill with his frequency
instrument." I quickly realized why nothing was working;
the frequency instrument was not built right. There had to be a
hidden side to this Rife machine with unseen, embedded
frequencies. I asked Crane if Rife knew that the virus and
bacteria frequencies had more to them then he was
telling. Crane answered, "He found out that some of
these virus and bacteria needed more then one frequency at a
time to destroy it, even cancer." That answered my
question. There was more to this machine then the
people working on them knew, and that kept the secret safe.
The unit was not complete yet and more work needed to be done
to get this to work every time. Tom Bearden was told what it was
and did write about it in a book called AIDS Biological Warfare
in a chapter called DEVELOPING THE ELECTROMAGNETIC CURE FOR
AIDS, Encouraging Preliminary Work on page 284. Tom
Bearden did come and visit and see everything that we were
doing with electromagnetic pump waves and mixing using
interferometers and heterodyning units.
When we did get something to work we would repeat the test over
and over. Crane would ask what circuits we were using, but
neither of us would answer him, and we'd change the subject. We
could kill certain things but not others.
Then came the day when we had 30 doctors in the room with
us. We prepared the slide, put it under the microscope and
put it up on a view screen so all could see. One push of
the button on the machine, and BANG, the one cell animal was
dead. All the doctors just went nuts. But the
comments were very discouraging, "WE WILL NEVER TALK ABOUT THIS,
WE WILL LOOSE OUR JOBS, THE FDA WILL RUN US OUT OF TOWN, WE WILL
LOSE EVERYTHING." The main objection was that everything I did
with the circuits was potted. Crane was the first to agree
with all of them about this, saying there was something hidden
in there, arguing, "We can't see it so we don't know if it
works." I answered that we must protect what we have done
so no one can change anything in the circuits. I kept very
detailed notes as I went along on the circuits. At first
they were very simple waves of different frequencies. As
time went by, the waves got more complex.
Rife comments in Crane's book, "Under the universal microscope,
disease organisms, such as those of tuberculosis, cancer,
sarcoma, streptococcus, typhoid, staphylococcus, leprosy, hoof
and mouth disease, and others, may be observed to succumb when
exposed to certain lethal frequencies, coordinated with the
particular frequencies peculiar to each individual organism, and
directed upon them by rays covering a wide range of
waves." Rife's first machine used two transmitters.
These two transmitters produce a mixing of frequencies (F1-F2)
and the addition of some frequencies (F1+F2 ). In the mixing
process many waves are produced with many fundamentals.
The scope pictures above show what the mixing process
produces. These wide band radio waves must contain
all the fundamental frequencies for the known virus. The
transmitters are then adjusted to produce the correct
fundamental frequency. This is done by adjusting the
amplitude output of one of the fundamental oscillators which
changes the fundamental frequency and creates many harmonics of
other fundamental frequencies, one behind the another, slightly
out of phase. An example of this would be to take 62Hz, at
3V peak to peak, and 1.059kHz, at 5V peak to peak, and mix the
two to get a total output of 1.5V peak to peak, gating the
oscillator at 150mV, and then modulating the 1.6000MHz
transmitter. The frequency ends up being 1.556120 (the
fundamental) with all the the harmonics added. Can you see
that this is not as simple as just a single frequency square
wave? The square waves were Crane's ideas, not
Rife's. (Square waves only contain odd harmonics
To gain an understanding of what a "MOPA" transmitter is, See
http://vintageham.com/stations.htm This link will give you a
better understanding of the transmitter Rife used. Instead
of an antenna, he used a gas tube. In the beginning he used two
of these tunable oscillators into the same gas tube. I
suspect that Rife figured out how to use the noble gas tube to
mix frequencies. I will be running the experiments to see what
The AZ 58 transmitter must be tuned within 1% of the frequency
fundamental to destroy the pathogen you're working with. See
http://icehouse.net/john34/crystal.mpg, for example. The
transmitter is a re-design of the original MOPA (Master
Oscillator Power Amplifier) used by Rife. This is not what
John Crane or John Marsh designed. The carrier frequency
must be at 4.33MHz to work with Hoyland's frequency list.
Hoyland's frequency list was accurate within 1% under all
circumstances. The Microscope was altered, and so was the
transmitter. I have found the missing tube for
the modulation and the missing circuit for the gating. I will be
adding more on this later. The crystal is a piezo from a
water purifier. It's oscillating frequency is
970kHz. The transmitter had a carrier wave of 4.33Mhz and
an audio frequency of 36.991kHz to achieve resonance.
Again I'm saying that you can not be off more then 1%. Thank you
Stan for suggesting this test.
I have repeated this test using a square wave into the AZ-58
transmitter. It is as I expected, the square wave does not have
the correct fundamentals in this band to work with this
transmitter. See it here
http://icehouse.net/john34/square111.mpg. The Square wave has
all odd harmonics as can be seen below. I have, however, found
where the resonate frequency is of this piezo crystal is using a
square wave. The square wave produces the same voltage
level. For example, if the sine wave audio is at
36.99 kHz for this crystal, the square wave will be at
74.063kHz, and both waves will produce a 5 volt output level
from the crystal. See
conclusion is that either wave will work but you must be much
higher in frequency with a square wave to get the same effect.
The transmitter must accept a full audio spectrum from 10Hz to
150Khz. I have only done this with "tubes" so far...
John Crane and John Marsh had the real working
machine. So why did they change it? If the
machine Rife gave to John Marsh was tube driven, this answers
the question. They did not understand tubes, nor did they want
to work with them. They tried "Muntzing" it so it could be
produced cheap. They took circuits out of it, but it did not
work after that. The other question is, who altered the
transmitter from the real Hoyland design? My best guess is
Marsh and Crane, in an effort to keep the secret of the
machine. The AZ-58 I'm working with has the correct
circuits put back into the machine. It also has the
correct gating circuits for the triode tube and can run in
The AZ-58 MOPA transmitter broadcasting through the Phanatron
tube is very directional. This is why the doctors had the
tube so close to the patient. See here
modulation is the key to the MOPA transmitter. I call this
low band FM modulation. The frequency can not be listened
to on AM, but can be heard on a low band FM all the way to 15Khz
. See it here http://icehouse.net/john34/modgrid1.mpg...
In the following experiment, Hoyland's given audio frequency
was input (as a sine wave) into the machine and modulated on the
RF carrier wave. We wanted to see if this would produce a
powerful harmonic at Hoyland's measured frequency from Rife's
1934 instrument. The analysis was done taken with an
oscilloscope probe tip (shorted to its own ground so as not to
damage the equipment with high rf power levels) directly in
front of the Rife tube. With slight adjustment of the RF carrier
wave, and, in some cases, slight adjustment of the audio
frequency, we were indeed able to show that a powerful harmonic
does indeed exist at each particular frequency Hoyland
gave. We also found that proper adjustment of the audio
signal level (dB) was important. If this is what Hoyland
and Rife were doing, the spectrum analysis shows us that this
process produces several powerful harmonics, each around the
same power level. This could explain why there was so much
confusion as to what the actual frequencies were. It also
raises the issue that the documented frequencies may or may not
be the ones that actually killed the germs, but perhaps a higher
or lower harmonic.
Pathogen // Hoyland's Measured Frequencies, 1934 Rife Ray
#4 Instrument (HMF) // Hoyland's Given Audio
Frequencies (HAF) // Audio Frequency Necessary to Bring
Harmonic in Range of Hoyland's Measured Frequency from the
1934 Rife Ray #4 Instrument // Necessary Audio Level
Bacillus X // 1,604 kHz // 21275 // 21275 // 4.0 V // 3.9 MHz
B. Coli (rod) // 417 kHz // 8020 // 8021 // 4.2 V // 3.6 MHz
B. Coli (virus) // 770 kHz // 17220 // 17220 // 4.1 V // 3.9 MHz
Streptothrix // 192 kHz // 7870 // 7870 // 3.0 V // 3.7 MHz
Tuberculosis (rod) // 369 kHz // 8300 // 8448 // 5.0 V // 3.7
Tetanus // 234 kHz // 1200 // 1268 // 4.8 V // 3.6 MHz
Typhoid Fever (rod) // 760 kHz // 6900 // 6900 // 3.1 V // 3.9
Typhoid Fever (virus) // 1,445 MHz // 18620 // 18620 // 4.0 V //
Experiments conducted today show that there is indeed a major
harmonic of the fundamental frequency from Rife's 1934 machine
very near the fundamental audio frequency from Hoyland's
machine. Were Hoyland's audio frequencies the true
M.O.R.s? Did Rife's machine produce a harmonic that was the
Pathogen // HAF // HMFreq , 1934 Rife Ray #4 Instr. //
Slight Adjustment of HMF used to correlate major harmonic of
HMF to HAF) // Percent Deviation
Bacillus X // 21,275 Hz // 1,604 kHz // 1,584 kHz // 2%
B. Coli (virus) // 17,220 Hz // 770 kHz // 763.7 kHz // 0.8%
B. Coli (rod) // 8,020 Hz // 417 kHz // 382.2 kHz // 8%
Tetanus // 1,200 Hz // 234 kHz // 243 kHz // 4%
Streptothrix // 7,870 Hz // 192 kHz // 192.7 kHz // 0.3%
Pathogen // HAF // HMF // Slight Adjustment of HMF
used to correlate major harmonic of HMF to HAF // Percent
Bacillus X // 21,275 Hz // 1,604 kHz // 1,584 kHz // 2%
B. Coli (virus) // 17,220 Hz // 770 kHz // 764.1 kHz // 0.8%
B. Coli (rod) // 8,020 Hz // 417 kHz // 398.5 kHz // 4.6%
Tetanus // 1,200 Hz // 234 kHz // 194 kHz // 17%
Streptothrix // 7,870 Hz // 192 kHz // 178.6 kHz // 7%
Tuberculosis (rod) // 8,300 Hz // 369 kHz // 382.3 kHz // 3.6%
Typhoid (virus) // 18,620 Hz // 1,445 kHz // 1,446.3 kHz
Typhoid (rod) // 6,900 Hz // 760 kHz // 774.45 kHz // 1.8%
All tests so far indicate that the phanotron tube is a
transducer of electrical waves to acoustical waves which are
able to mechanically stimulate a piezocrystal to
resonance. This is something that an ordinary antenna
system (i.e. a "pad antenna" system) cannot do. We found
the tube, like an ordinary audio speaker, to be
directional. The stimulation of the crystal varies with
the orientation of the tube.
"Rife" Frequency Instrument Retailers
The Detox Box - Rife Unit. $1795 Discounted Price - Free
S&H. 30 day guaranty - Pads & Cylinders.
New 2008 Rife Machine. 200 New Additional Frequencies Free.
S&H 60 Day Money Back Guarantee.
Rife Machine Software. Use your computer as a Rife Machine.
Download this new technology now.
Raymond Rife. New Technologies for Improving Your Quality of
life. Find Out More!
New Wellness Pro System. 1,000 Autocodes, 5 Wave Types.
Rife Frequencies -Wholesale Pricing.
Perkl-Light. Finally - An Energy Device That Is Affordable By
Rife 101 Energy Machine. Tired of being sick? Get well
naturally. Read my healing story.
Your Source for the Finest Rife Instruments. Highly Durable!
Google Search Results ( First Few Pages
Royal Raymond Rife was a brilliant scientist born in 1888 and
died in 1971. After studying at Johns Hopkins, Rife developed
technology which is still ...
Royal Raymond Rife
ELF Disruption & Countermeasures · Rife Breakthrough -
Hepatitis Zapped · Royal Raymond Rife - Corrections &
Scientific data and white papers describing the work of Dr.
Royal Rife in developing technologies that utilize
electro-medicine to kill harmful microbes.
The Story of Roy Rife
Royal Raymond Rife. The history of medicine has always been the
history of alternative medicine, for every new idea, every new
theory, every new method of ...
Ultra Microscopes and Cure Rays: Dr. R. Raymond Rife - Gaston
Overview of Rife's work with historic photographs and newspaper
clippings plus audio clips.
The Royal Raymond Rife Story
Dr. Royal Raymond Rife, M.D., was born in 1888. In the 1930's he
had a research clinic at 2500 Chatsworth Blvd in San Diego,
Royal Ramond Rife Zerozerotwo Productions
THE BRAND NEW DVD of The Greatest Cover-up in Medical History!
THE RISE AND FALL OF A SCIENTIFIC GENIUS The Forgotten Story of
Royal Raymond Rife ...
My Work on Rife. Last updated 10/4/06. An Ongoing Research
Project. Page 1 of 2. Special thanks to Jeff Rense for making
John's interview on the September 6 ...
Amazon.com: Royal Raymond Rife, Humanitarian, Betrayed &
Persecuted: Fred Farly: Books.
ROYAL RAYMOND RIFE & THE CANCER CURE THAT WORKED! by Barry
His name was Royal Raymond Rife. Close friends, who loved his
gentleness and humility while being awed by his genius, called
him Roy. ...
Xenophilia - Rife Cancer Cure
Some claim that Dr. R. Raymond Rife 1. developed a super
microscope, ... No one doubts that Royal Raymond Rife was a real
individual who did indeed create ...
The Dr. Royal Raymond Rife story. Advanced Rife technology.
The Dr. Royal Raymond Rife story. Advanced Rife technology.
The Dr. Royal Raymond Rife story. Advanced Rife technology.
Model. ... This instrument is based on Royal Raymond Rife's
quest to study the unique ...
Raymond Rife is a Licensed Clinical Social Worker specializing
in emergency crisis ... Following is a list of organizations
with whom Raymond Rife has ...
Directory:Royal Raymond Rife - PESWiki
You have probably never heard of Dr. Royal Raymond Rife before,
but in this unique documentary you will learn all about the life
of this overlooked medical ...
Royal Raymond Rife and The Rife Frequency Generator
A banquet was held to honor Royal Raymond Rife at the estate of
Dr. Milbank Johnson. It was held on November 20, 1931.
Forty-four of the countries most ...
FutureTechToday.com: Royal Raymond Rife -- Dr. Rife and Cancer
We are a research, development, and distribution facility that
provides cutting edge products in areas such as experimental
Royal Raymond Rife - HiddenMysteries Health Archive
The scientist Royal Raymond Rife discovered that THE UNIQUE
ELECTRONIC SIGNATURE OF EACH SPECIFIC DISEASE can be modified to
eliminate nearly every ...
The Rife Forum - Links- Gerald F. Foye - Royal Raymond Rife ...
developed by Royal Raymond Rife, as well as their modern
counterparts. ... Order Online: Royal Raymond Rife,
Humanitarian, Betrayed · Edit/Delete Link ...
Royal Raymond Rife and the History of Electro-Medicine
Royal Raymond Rife discovered effective ways to eliminate
pathogenic microbes from effecting your health in the early
1900's. Here is some background on ...
The Amazing Raymond Rife Story
Would you think that finding a cure for cancer would make you a
hero? Read what really happened.
Raymond Rife history
By using state-of-the-art Vibrational Energy, we now have
choices in creating Perfect Health that are quick, easy,
predictable, and affordable.
Dr. Royal Raymond Rife Original Audio Library - Hear Dr. Rife
Dr. Royal Raymond Rife Speaks - Vintage Audio Archives Now
Available. Now hear Dr. Royal Raymond Rife in his own words on
this meticulously restored ...
Dr. Raymond Rife and His Miracle Machine
Mark Rigney has been an entrepeneur and health professional for
over two decades. Learn more about Dr. Raymond Rife at
Deposition of Royal Raymond Rife - Tijuana - March 7, 1961
Deposition of Royal R. Rife taken in the city of Tijuana, Baja
California, Republic of Mexico, March 7, 1961.
Royal Raymond Rife: A scientific life of mystery - Medical ...
Many years ago, there was a fellow in the San Diego area who
invented a super-microscope which, it was claimed, visualize
livin... by PasadenaDave.
Royal Raymond Rife and Bioelectric Medicine
The Batyah Project Use of the RifeBare Device · Horizon
Technology -- Royal Raymond Rife. (Gary Hawkins) (Includes
Message Archives) ...
History of Alternative Cancer Treatments Vs. Allopathy: Hoxsey
History of Alternative Cancer Treatment: Hoxsey, Royal Raymond
Rife, Vitamin B17 (Amygdalin .... Royal Raymond Rife was born
1888, in Elkhorn, Nebraska. ...
Rife Documentary Trailer 2
For the full story: http://www.zerozerotwo.org The Rise and ...
3 min 33 sec -
PowerPedia:Royal Raymond Rife - PESWiki
Royal Raymond Rife (May 16, 1888 - August 11, 1971) was (and is
still today) a controversial figure celebrated by part of the
alternative medicine community ...
Royal Raymond [email protected]
Royal Raymond Rife. created by lockeduser992 · printable version
· chaos · cure for cancer · Wilhelm Reich · Wilhelm Reich in
Hell · electron microscope ...
Royal Raymond Rife was born in Elkhorn, Nebraska, on May 16,
1888. His father was a mechanical engineer. In 1907, he moved to
New York and began working for ...
Royal Raymond Rife Zerozerotwo Productions
Royal Raymond Rife, "genius scientist", trained for six years at
the Carl Zeiss Optical Company in Germany and became the
inventor of powerful microscopes, ...
royal raymond rife videos - Free Video & Movie Download
Regina Meredith of Conscious Media Network talks with Stephen
Ross about the controversial story about Royal Raymond Rife and
his Universal Microscope. ...
Raymond Rife: ZoomInfo Business People Information
View Raymond Rife's professional background on ZoomInfo, the
largest index of people in business in the world. Find who
you're looking for at ZoomInfo.
Royal Raymond Rife Historical Video
royal rife. Shown here with one of his custom made, high powered
microscopes - this man developed a method to actually view
living viruses! ...
Royal R. Rife Humanitarian: Betrayed And Persecuted - Google
by Gerald F. Foye - 2002 - Medical - 156 pages
Rife's father, Royal Raymond Rife, Sr., was born in 1867, in
Ohio. ... Royal Raymond Rife, Jr's venture into the world did
not start off well as his mother, ...
The Tom Bearden Website
In the 1930’s and 1940’s, Royal Raymond Rife revolutionized
everything that has been ... Royal Raymond Rife in his
laboratory. Courtesy Christopher Bird ...
MySpaceTV Videos: Raymond Rife by aremember
Raymond Rife by aremember Watch it on MySpace Videos.
Rife Video Documentary - Lymebook.com
This DVD set documents the scientific ignorance, official
corruption and personal greed directed at the inventor of the
Beam Ray Machine, Royal Raymond Rife ...
Lyme Disease Alternative Treatments :: Books and DVDs
Video Documentary—Rise and Fall of a Scientific Genius: The
Forgotten Story of Royal Raymond Rife Zero Zero Two Productions
Festival Discovery: Introducing Ryan Eslinger
It was then that he first learned about a scientist from the
1920s named Royal Raymond Rife who created a "frequency machine"
that Rife said could destroy ...
Royal Raymond Rife — Blogs, Pictures, and more on WordPress
The genius of Dr Royal Raymond Rife-did this man find the cure
to most diseases? ... Find other items tagged with
Re: Dr raymond rife and a machine that may help at AIDS
Alternatives Support Forum.
Dr raymond rife and a machine that may help at AIDS
Alternatives Support Forum.
XENOPHILIA (The Band) - The Official Web Site!
Some claim that Dr. R. Raymond Rife 1. developed a super
microscope, 2. was able to see live viruses, 3. which gave off
their own unique light, ...
... Royal Raymond Rife, Pt. Loma. He added that he had isolated
this cancer organism but is not positive yet that it is the
direct cause of the disease. ...
Royal Raymond Rife tBeam Ray Treatment - Hepatitis C - MedHelp
This is a discussion on MedHelp about Royal Raymond Rife tBeam
Ray Treatment. Community members of MedHelp provide help,
support, guidance and discussion ...
Who was Royal Raymond Rife?
Royal Raymond Rife, born in 1888, was a gifted scientist and
researcher whose revolutionary research into the invisible realm
of viruses and bacteria was ...
Royal Raymond Rife Technology for the novice.
That very year, Dr. Royal Raymond Rife, a scientific genius, was
presented ... In reading about Dr. Royal Raymond Rife I
discovered a website devoted to his ...
Royal Raymond Rife - HotStockMarket Message Boards - Penny
Royal Raymond Rife Politics & Religion. ... HSM Newbie. Join
Date: Oct 2006. Location: Toronto. Posts: 34. Royal Raymond Rife
Royal Raymond Rife was the inventor of the Universal Microscope
which he presented to the world in 1933. Besides being the most
powerful optical microscope ...
The Rife Forum
The purpose of this forum is to facilitate the exchange of
information about the work of Royal Raymond Rife and John Crane,
the history, microscope and ...
Lyme Community Forums: Royal Raymond Rife in his Laboratory
the Dr. Royal Raymond Rife story - Sherdog Mixed Martial Arts
Masterpiece This is the fascinating video documentary The Royal
Rife Story (2004) which tells the lifestory of a forgotten
medical pioneer in fields.
ROYAL RIFE, RIFE LINKS SOURCES, DR. ROYAL RIFE HISTORY STORY
Short Review: Rife Energy Medicine---"During the 1920’s and
30’s, Dr. Royal Raymond Rife produced some rather astounding
accomplishments in medicine and ...
This is an excellent documentary, and it features some genuine
audio recordings of Royal Raymond Rife himself, explaining
research and technical details ...
Deposition of Dr. Royal Raymond Rife - EMR Labs, LLC
Ans: Royal Raymond Rife. 2. Quest: Where do you now reside? Ans:
As a tourist in Tijuana. 3. Quest: Is it your intention to
attend as a witness at the trial ...
HyperFlight. Current & historical credits, permissions,
In the most remarkable confluence of five disciplines, Raymond
Rife engages optics, physics, mechanical engineering,
microbiology, and electronics to attack ...
CROSSOVERroad - Beam Ray
Based on the work of Dr. Royal Raymond Rife, Beam Ray has
researched and developed a ... Discover the Story of Royal
Raymond Rife and Beam Ray Technology ...
Dr. Royal Raymond Rife - 8th Sep, 07:57 AM - Nursing for Nurses
Has anyone followed the studies by Royal Raymond Rife? What are
your thoughts on him? If you dont know about his work, or heard
of him. You can google.
Rife Technology Royal Raymond Rife Literally Cured Disease ...
Rife Technology heals without drugs or surgery faster than
conventional medicine. Royal Raymond Rife and his fantastic
discoveries and developments.
Royal Raymond Rife and Philip Hoyland standing on opposite
Title:. Royal Raymond Rife and Philip Hoyland standing on
opposite sides of a mechanical device. Creator:. [Unknown].
Subject:. People Groups Rife, Royal R. ...
Royal Raymond Rife and Philip Hoyland standing on opposite
Title:. Royal Raymond Rife and Philip Hoyland standing on
opposite sides of a mechanical device. Creator/Contributor:.
[Unknown]. San Diego union-tribune ...
More results from content.cdlib.org »
Rife Frequency generator, sweep option
The discovery promised fulfillment of man's age-old hope for a
specific destroyer of all his infections diseases, although
Royal Raymond Rife avoided any ...
The two DVD documentary set The Royal Rife Story and Royal Rife
You may not have heard of Dr. Royal Raymond Rife before, but in
the first two hour DVD documentary The Royal Rife Story you will
learn about his great ...
Widgetbox › Royal raymond rife Widgets for MySpace, Wordpress
Get royal raymond rife widgets on Widgetbox.com! Find royal
raymond rife widgets for MySpace profile, Wordpress Blog,
TypePad blog and other websites.
Royal Raymond Rife (6/6)
One day, the name of Royal Raymond Rife may ascend to its
rightful place as the giant of modern medical science. Until
that time, his fabulous technology ...
Royal Raymond Rife (4/6)
THE STORY OF ROYAL RAYMOND RIFE...continued. On November 20,
1931, forty-four of the nation's most respected medical
authorities honoured Royal Rife with a ...
The Cancer Cure That Worked by Barry Lynes :: Royal Raymond
sci.med: Re: Royal Raymond Rife
electronic approach to curing literally every disease on the ...
> planet caused by viruses and bacteria. ... it is a
discovery that ...
sci.med: Re: Royal Raymond Rife
harassing Dr. Rife. ... Do people think this hareleif is a
particularly weird troll, ... >nursery rhyme, Ring around the
New Light on Therapeutic Energies - Google Books Result
by Mark L. Gallert - 2003 - Body, Mind & Spirit
... MADE VISIBLE Microscopes constructed on entirely new
principles have been invented and developed by Royal Raymond
Rife, a scientist and biologist. ...
Royal Raymond Rife - Care2 Members who love this Role Model.
ALTERNATIVE HEALTH and HEALING
Royal Raymond Rife and his engineer John Crane developed a new
type of frequency therapy .... The Questions to and Answers from
Royal Raymond Rife in 1960 ...
RifeLabs - Links of Interest - rifelabs.com
Royal Raymond Rife - History Corrections & Perspective ·
Royal R. Rife Overview ... Deposition of Royal Raymond Rife -
Tijuana - March 7, 1961 ...
Royal Raymond Rife eBook
Royal Raymond Rife. Author: medicaltruth.com Category:
Miscellaneous. This is the true story of a genius who's
discovery could have changed the world. ...
Story of Royal Raymond Rife, info about Energy Healing: Rife:
Story of Royal Raymond Rife.
Royal Raymond Rife Resonators Science & Skepticism.
Royal Raymond Rife’s Amazing Discoveries
It has been nearly three decades since Royal Raymond Rife died
and more than 65 years since he conducted his successful cancer
experiment in 1934, ...
A cancer killer? - Care2 News Network
Raymond Rife did a similar but better thing in the 1930's
without any meatl injections. Google Rife machine. His work was
destroyed and the cancer business ...
Ruby's Emporium: Rife Page
Dr. Royal Raymond Rife: Several sites and links available. ...
Other rife related books are Fred Farly's "Royal Raymond Rife,
Deposition of Royal Raymond Rife by free energy
Read free energy's latest blog entry titled Deposition of Royal
Raymond Rife on Gaia Community.
History of Royal R. Rife
This is a history of the life of Royal Raymond Rife, Jr.. Not
much is known of his early life, other than he was born in
Elkhorn, Nebraska, on May 16, 1888, ...
Royal Raymond Rife
But they are all true, Royal Raymond Rife will go down in
history as the greatest scientific Genius of the 20th Century
and Barry Lynes a scholar and a ...
Your Support Maintains This
Rex Research Civilization Kit
Your Best Bet & Investment in
Sustainable Humanity on Earth ...
Ensure & Enhance Your Survival &
Genome Transmission ...
rexresearch.com on a Data DVD !
USA / Canada : $ 13 Postpaid // Foreign :
$18 Postpaid >>
Rex Research, POB 19250,
Jean, NV 89019 USA