rexresearch.com
rexresearch1.com
Attila ALPEREN
TurXotor Motor / TurXator Generator
TurXotor Motor / TurXator Generator
PESWiki.com
Pure Energy Systems News, September 18, 2013
TurXotor Demo
...On September 7, Attila Alperen told me that his Alperen™ Group's TurXotor motor is poised to be among the top three featured at the event. He said that the Turkish government wants to create a large electric car industry in Turkey around this invention that will enable electric vehicles to never have to be plugged in, and to be able to operate with only a few batteries on board, because the power source is onboard, pulling energy from the environment somehow -- harnessing the wheelwork of nature, as Tesla coined it.
https://www.youtube.com/watch?v=h7dC7FSpKq0
Alperen UniTransformer
Alperen UniTransformer Invented and patented by Col. Attila ALPEREN...
UniTransformer; Transforms AC voltage to:
AC/AC Transformer.
AC / DC transformer WITHOUT DIODES
Full Wave DC voltage WITHOUT DIODES,
Half Wave DC voltage WITHOUT DIODES.
UniTransformer fixes Power Factor...
UniTransformer is a Power Amplifier; It can amplify output power while transforming AC voltage to AC or DC voltage...
UniTransformer is a Electronic Generator...
UniTransformer is a Smart BatteryCharger. It charges battery as electronic generator...
https://www.youtube.com/watch?v=0CamEZuOGFs
Alperen I-Turxator (Lenzless Current Generator)
Col. Attila ALPEREN R&D CENTER
https://www.youtube.com/watch?v=WMUpHPP-YsQ
TurXator & TurXotor Driver Circuits
https://www.youtube.com/watch?v=0wEZ8MzEG3M
TurXotor industrial Model
https://www.youtube.com/watch?v=OapkcOTKnrU
TurXator & TurXotor Future Green Energy: T = + [N = - (Δφ/Δt)]
https://www.youtube.com/watch?v=A_VPoYV3zig
Alperen Ghost Transformer (Lenzless)
https://www.youtube.com/watch?v=91kre4gs35Y
Alperen Electronic Alternator
https://www.youtube.com/watch?v=hRgQEurDhJY
3 MW TurXator Generator
https://www.youtube.com/watch?v=OapkcOTKnrU
TurXator & TurXotor Future Green Energy: T® = + [N = - (Δφ/Δt)]
TurXator ve TurXotor technologies that verifies "Alperen Energy Regeneration Law" in science; Invented and patented by Col. Attila ALPEREN
Future Green Energy T® = + [N = - (Δφ/Δt)] on video;
1. As electricity; on lamps; Turxator Energy, "REUSE"
2. As mechanic power: increased rpm; Turxotor Energy "CANCEL"
3. As saved energy; %50 decreased input power; result; "OVER UNITY"
As result: we did "cancel Lenzs Law effects" and "reuse" this energy positively...
T® = + [N = - (Δφ/Δt)]
Energy Conservation Law states;
Faraday law: N = Δφ/Δt
Lenzs Law: N = - (Δφ/Δt)
We agreed that Faraday and Lenzs Laws are correct.
Efficiency ratio;
E = [N = Δφ / Δt] / [N = - (Δφ / Δt)]
E = smaller then 1
We discover and verified with technologies that efficiency ratio is NOT correct.
Verified by Alperen Technologies: T = +[ N = - (Δφ / Δt)] is the reality.
Therefore;
Alperen Energy Regeneration Law says:
Efficency ratio;
E = N / T
E = { N = Δφ / Δt / N = +[- (Δφ / Δt)] }
E= maybe bigger then 1
https://www.youtube.com/watch?v=d24SY1Sf9mU&list=PL7BB43C411F3F67A8&index=3
TurXbine
https://www.youtube.com/playlist?list=PL7BB43C411F3F67A8
Alperen WatchQueue by Col. Attila ALPEREN R&D CENTER
WO2013048352A1
The method of power extraction from pressure
[ PDF ]
Abstract
The method of invention consists of the extraction and utilization of potential energy as usable energy contained in pressurized liquid, air, and gas which is transferred via transfer lines such as pipes without losing the pressure values of inlet and outlet of the system.
Every pressurized liquid, air, and gas has a usable potential energy. In the current systems, the need for additional inlet pressure power increases at Inlet(3) in proportion to the amount of usable energy in the Turbine Shaft(5). Thanks to this invention this potential energy is converted into usable energy in the Turbine Shaft(5). Contrary to the current systems, during the utilization of this energy in the Turbine Shaft(5), the equality of Outlet(4) pressure power and Inlet(3) pressure power is preserved.
The sample system showing the operating principle of the invention consists of eight parts. These are; Turbine(l), Pressure Preservation Chamber(2), Inlet(3), Outlet(4), Turbine Shaft(5), alternators, generators, and loads (6) Pressure Preservation Chamber Spaces(7), and Pressure Direction Nozzle(8).
The operating principle of the invention is as follows: In order to generate mechanical energy, any or some of the pressurized liquid, air, and gas applied from Inlet(3) are directed to the Turbine(l) blades positioned in the Pressure Preservation Chamber(2) via Pressure Direction Nozzle(8). This mechanical energy generated in the Turbine(l) is transferred to the outside the system via the Turbine Shaft(5) and thus the generating of mechanical power necessary for any alternators, generators, and loads (6) is provided. The pressure power from Inlet(3), after applied to the Turbine(l) inside the Pressure Preservation Chamber(2) whose internal pressure is preserved and which is kept closed, is transferred to the outside of the system from the Outlet(4) without losing its (inlet's) own pressure power.
Since the turbine is positioned in the Pressure Preservation Chamber (2), the counter power applied to the Turbine (l) via the Turbine Shaft (5) by the alternators, generators, and loads (6) is not reflected back to the Inlet (3).
Therefore, while the pressure from Inlet (3) is transferred to the outside of the system without losing its pressure value at Outlet (4), the potential energy contained in this pressure power is extracted via the Turbine Shaft (5) as usable energy.
There are no Pressure Preservation Chamber (2) and spaces in the current available systems. As a result, the counter power of the alternators, generators, and loads (6) is reflected back to the Inlet (3) via the Turbine Shaft (5) and the Turbine (l). However, thanks to this invention, the counter power is not reflected back to the Inlet (3) since the Turbine (l,) is positioned in the Pressure Preservation Chamber Spaces (7).
WO2013015753
HIGH EFFICIENT TURBINE TECHNOLOGIE
[ PDF ]
This invention is related with high-efficient turbine technologies used in producing mechanical energy and is composed of seven components. This invention is a mechanism diverting the inlet energy produced by pressurized dust, gas, air, and fluids into mechanical energy. This invention can be used in every related field.
INSTRUCTION BOOK
This invention is related with high-efficient turbine technologies used in producing mechanical energy and is composed of seven components. As shown in Figure - 1. these components are the main body( 1 ). a mechanical power shaft(2). an energy diversion s h a it ( 3 ) . blades(4). an adjustable outlet nozzle(5). a turning turbine inlet ccll(6) and a turning turbine outlet cell(7).
This invention is a mechanism using repeatedly the input pressure generated by pressurized dust. gas. air and fluids and converting into high efficient mechanical energy. This invention can be used in every related field.
The operating principle of the invention is as such: The s\stem transfers the pressurized power (dust. gas. air. and fluid) applied to the turning turbine inlet cell ( 6 ) via its energy diversion shaft(.l) from the cells existing in the blades of the system(4) to the turning turbine outlet cell(7). This pressurized power in the turning turbine outlet cell(7) is transferred to the outside of the turbine through the adjustable outlet nozzle(5). During this process the pressurized power which is in the turning turbine inlet cell(6) is diverted into the mechanical energy and is directed through energy diversion shaft(3) just about 180° opposite the application direction of input pressure power and because it is directed to the out of the turbine system via adjustable outlet nozzle(5). the power produced in the mechanical power shaft is doubled. The output power can be adjusted and equaled with the input power thanks to the adjustable outlet nozzle(5). Therefore the input power can be used repeatedly in the other systems by being taken to the outside of the turbine system via the adjustable outlet nozzle 15).
The turbine, when operated in a looped closed system which has equal input pressure and output pressure power doesn<'>t need another external power source. That is. the output power can be looped preferably either in the same system or parallel and 'or series connected other turbine systems.
C'urrcntl). there is no high efficiency turbine system which uses the input pressure power repeatedly and as an additional power. Current turbine technologies are based on the power generated by the blades being as much as the radius of the turbine. In this occasion, in order to take full advantage of input power it has to be done either by increasing the number or the lengths of the blades. While the input pressure is converted into mechanical energy in these systems, all the input power is wasted in current turbine systems. In this invention, since the input pressure power is used twice both in the full diameter of the turbine and in the 180º opposite the application direction of input pressure power, the input pressure power is converted into twice as much as mechanical output power in the mechanical power shaft(2). Because the input pressure power is taken advantage by being used once again in the 180° opposite the application direction of input pressure power by the energy diversion shaft(3). the power produced in the mechanical power shaft(3) is doubled and taken out of the turbine system in order to be used repeatedly in other systems.
The differences of this invention from the current technologies are the cost of production and time, the variety of usage and the capacity of the power produced b> turbines compared with other available technologies and this invention provides much better benefits and advantages than current other available technologies. Thanks to these features, this invention can be used in e\er\ field of industry and energy production.
High Efficiency Turbine Component List
1. Main Body
2. Mechanical Power Shaft
3. Energy Diversion Shaft
4. Blades
5. Adjustable Outlet Nozzle
6. Turning Turbine Input Cell
7. Turning Turbine Output Cell
TR201107424
Yüksek verimli türbin
[ PDF ]
TR201109533
Basınçtan güç ekstraksiyon (açığa çıkartma) yöntemi
[ PDF ]